Let's recap ~
![]()
Last winter was mild. So maybe I wore pants two or three times. Because as we all know, I prefer wearing a dress. This winter, not so mild. So I had to go into my pants collection, which I hadn't looked at for two seasons. I was hoping that this would be a mild winter too. Of course it isn't and now I need to stay warm. After carefully examining them, two pair needed the linings replaced. One pair needed the elastic removed from the waistline and a new one inserted. Finally a couple pairs were sent to the dry cleaners. That left several pairs in rotation so I needed to change this situation.
As stated previously, I've made five pair of lined black wool crepe pants ~ one pair of them are pictured on the left. These became a staple in my winter wardrobe because they provide such a great foundation for adding tops, twinsets, sweaters to complete an outfit.
There were two pairs of black wool crepe pants that needed to be repaired. The fashion fabric was fine - no tears, rips or stains so I wanted to preserve the fabric. The lining in one pair was in total shreds and the other pair looked like this...
![]()
![]()
I could cut out new linings and add them to the pants or I could change my lining technique for something that would last a little longer. I'm going with changing my lining technique so that I won't have to repair these as often. Now, do I flat line or underline?
Lining versus underlining
"A lining is a complete separate "garment" attached to the inside and secured at one or more places such as the waist or the hem. An underlining is an additional layer that is added to each part of the garment before it is constructed. On a lined garment, the seams will be concealed, but on an underlined garment they will be visible."
Flat Lining Techniques were discussed in this blog post on pants or can be found in Threads Issue #42, page 58. If you have the Threads Magazine Archive DVD, the article gives you a step by step description on how to flat line a garment. There is also a great article about underlining in Threads Issue #68, page 37 written by Sandra Betzina.
First let me share the items I'll use to remake the pants...
![]()
As I mentioned previously, after wearing a pair of flat lined pants versus wearing the underlined pair, I'd rather wear the underlined pairs because they are less irritating to my inner thighs. Back to the deconstruction...
Reconstructing the pants...
First the lining is carefully cut out. It's the easiest & fastest way to get it out of the pants. I toss this. I guess it could be saved for future projects but why? So in the garbage it goes.
![]()
![]()
Next the elastic comes off. Now this is a process - its kinda involved getting five rows of stitching out, especially in black fabric. I normally do this while watching a movie/tv show so that I don't mind the time it takes to remove it.
![]()
Then I rip the pants apart and iron the fabric flat...holding onto the rayon bemberg tape from the hemline to reuse.
Finally I lay the front and back pattern pieces on the lining material and cut new pattern pieces. I will be honest here, sewing books advise against using this technique for a variety of reasons. Me, I use this technique all the time and have no problems BUT I feel it's prudent to tell you that it's not the accepted technique.
![]()
After the lining pieces are cut out, I pin the lining and fashion fabric together. The pieces are taken to the serger and serged together.
![]()
Then the pants are reassembled with the fabric and lining acting as one.
![]()
This is a hanger shot to show the finished pair of pants. However, I found a great piece of fabric in the collection so I'm going to make a quick cardigan to go with my remade pants. I'll wear it with this white sleeveless blouse that I made last winter.
![]()
Hopefully this process was helpful to someone! I can tell you that this is the "lining" method I will be using going forward for my pants/trousers. And now that I have two remade pairs of pants plus the new gray pair in my wardrobe, I'm moving onto something else.
...as always more later!
As stated previously, I've made five pair of lined black wool crepe pants ~ one pair of them are pictured on the left. These became a staple in my winter wardrobe because they provide such a great foundation for adding tops, twinsets, sweaters to complete an outfit.
There were two pairs of black wool crepe pants that needed to be repaired. The fashion fabric was fine - no tears, rips or stains so I wanted to preserve the fabric. The lining in one pair was in total shreds and the other pair looked like this...
Shot of the inner thigh shredding
Close up of the shredded lining in the thigh area
I could cut out new linings and add them to the pants or I could change my lining technique for something that would last a little longer. I'm going with changing my lining technique so that I won't have to repair these as often. Now, do I flat line or underline?
Lining versus underlining
"A lining is a complete separate "garment" attached to the inside and secured at one or more places such as the waist or the hem. An underlining is an additional layer that is added to each part of the garment before it is constructed. On a lined garment, the seams will be concealed, but on an underlined garment they will be visible."
~ from the Lining Chapter in The Dressmaker's Technique Bible
Flat Lining Techniques were discussed in this blog post on pants or can be found in Threads Issue #42, page 58. If you have the Threads Magazine Archive DVD, the article gives you a step by step description on how to flat line a garment. There is also a great article about underlining in Threads Issue #68, page 37 written by Sandra Betzina.
First let me share the items I'll use to remake the pants...
Stretch elastic, black bemberg lining, Hug Snug Seam Tape
As I mentioned previously, after wearing a pair of flat lined pants versus wearing the underlined pair, I'd rather wear the underlined pairs because they are less irritating to my inner thighs. Back to the deconstruction...
Reconstructing the pants...
First the lining is carefully cut out. It's the easiest & fastest way to get it out of the pants. I toss this. I guess it could be saved for future projects but why? So in the garbage it goes.
Removing the lining by cutting it out
Old lining trashed
Next the elastic comes off. Now this is a process - its kinda involved getting five rows of stitching out, especially in black fabric. I normally do this while watching a movie/tv show so that I don't mind the time it takes to remove it.
Then I rip the pants apart and iron the fabric flat...holding onto the rayon bemberg tape from the hemline to reuse.
Finally I lay the front and back pattern pieces on the lining material and cut new pattern pieces. I will be honest here, sewing books advise against using this technique for a variety of reasons. Me, I use this technique all the time and have no problems BUT I feel it's prudent to tell you that it's not the accepted technique.
After the lining pieces are cut out, I pin the lining and fashion fabric together. The pieces are taken to the serger and serged together.
Then the pants are reassembled with the fabric and lining acting as one.
This is a hanger shot to show the finished pair of pants. However, I found a great piece of fabric in the collection so I'm going to make a quick cardigan to go with my remade pants. I'll wear it with this white sleeveless blouse that I made last winter.
Hopefully this process was helpful to someone! I can tell you that this is the "lining" method I will be using going forward for my pants/trousers. And now that I have two remade pairs of pants plus the new gray pair in my wardrobe, I'm moving onto something else.
...as always more later!