Continuing in my quest to own more shirts, I bought this fabric last November. I saw it in an email ad from Fashions Fabrics Club and I loved the "Florentine Romantic" air of it. Now before y'all start, I don't know if that's what it really is. It's just what I'm calling it, okay?!
I used my full back version of my TNT shirt so I didn't have to cut the pattern up too much. As it is, it took some consideration to get the fronts cut in a way I liked. I did end up mirroring the print on the sides. When I laid it out, it looked like the angels formed a bib on the front and I really liked that!
The construction went together like normal. I chose not to use the burrito method for this shirt and to topstitch the shoulder seams down to the back yoke instead. Boy am I glad I went this way! Because after sewing the shoulder and side seams together I got this...
![]()
Can you say pissed off! I posted it to Instagram and got a bunch of suggestions. There were two that really resonated with me.
1. Adding a solid color front placket
Although I couldn't decide how many pieces to recut in the solid color. Front placket, collar, undercollar & cuffs? Or just the front placket, collar and undercollar? And the thought of adding a red color (because that's what I had on hand that coordinated) messed with my finish version of the shirt.
2. Recut the front pieces so they'd match
Since this was cut tunic length I could lose some length at the bottom without affecting the length of the shirt too much. I went with option number two.
To make it work I did the following ~
o Recut the piece that annoyed me after matching it to the opposite front to insure the motifs worked at the center front.
![]()
![]()
![]()
o I recut the front neckline and shoulder and sewed the front placket piece and side bodice together. Then I realized I'd shortened the armhole by making that adjustment.
![]()
o To fix the armhole, I recut the piece by placing both front pieces on top of each other. Then I cut the altered piece's armhole to match the unaltered piece. This insured that the armhole was fixed correctly.
![]()
![]()
o Then I cut the extra off the bottom of the shirt front.
I laid everything on the cutting/sewing table one more time and checked to insure the motifs matched on the front. Then I sewed it together.
Here is how it looks now - front and back views...
![]()
![]()
I have to admit that this slowed down the construction of the shirt considerably. I was hoping to have it to the point where it only needed buttons & buttonholes like the other two shirts that preceded it. Alas it was not to be but I am glad it was an easy fix. I'm also thrilled that I only needed to rip out the shoulder & side seams and one front piece to make it work.
Since this was a unique fix to an interesting challenge, I decided to document the process separately from the actual shirt reveal which will probably be later this month.
...as always more later!
I used my full back version of my TNT shirt so I didn't have to cut the pattern up too much. As it is, it took some consideration to get the fronts cut in a way I liked. I did end up mirroring the print on the sides. When I laid it out, it looked like the angels formed a bib on the front and I really liked that!
The construction went together like normal. I chose not to use the burrito method for this shirt and to topstitch the shoulder seams down to the back yoke instead. Boy am I glad I went this way! Because after sewing the shoulder and side seams together I got this...
Can you say pissed off! I posted it to Instagram and got a bunch of suggestions. There were two that really resonated with me.
1. Adding a solid color front placket
Although I couldn't decide how many pieces to recut in the solid color. Front placket, collar, undercollar & cuffs? Or just the front placket, collar and undercollar? And the thought of adding a red color (because that's what I had on hand that coordinated) messed with my finish version of the shirt.
2. Recut the front pieces so they'd match
Since this was cut tunic length I could lose some length at the bottom without affecting the length of the shirt too much. I went with option number two.
To make it work I did the following ~
o Recut the piece that annoyed me after matching it to the opposite front to insure the motifs worked at the center front.
Making it match up
Yes, originally I added some extra to the
side seams to give the shirt a looser fit
Using my ruler to make sure both pieces matched in the front
o I recut the front neckline and shoulder and sewed the front placket piece and side bodice together. Then I realized I'd shortened the armhole by making that adjustment.
o To fix the armhole, I recut the piece by placing both front pieces on top of each other. Then I cut the altered piece's armhole to match the unaltered piece. This insured that the armhole was fixed correctly.
I was going to use the pattern piece to fix the armhole at first
Instead I laid one front on top of the other
and cut the armhole out that way
o Then I cut the extra off the bottom of the shirt front.
I laid everything on the cutting/sewing table one more time and checked to insure the motifs matched on the front. Then I sewed it together.
Here is how it looks now - front and back views...
I really like how the motifs form a bib look!
Full gathered back to take advantage of the pattern
I have to admit that this slowed down the construction of the shirt considerably. I was hoping to have it to the point where it only needed buttons & buttonholes like the other two shirts that preceded it. Alas it was not to be but I am glad it was an easy fix. I'm also thrilled that I only needed to rip out the shoulder & side seams and one front piece to make it work.
Since this was a unique fix to an interesting challenge, I decided to document the process separately from the actual shirt reveal which will probably be later this month.
...as always more later!