There is nothing new about these two shirts. I'm posting them more for me. The one thing I learned while doing the decade recap is it was great to have photos of all the things I'd made...especially since many of them no longer live in my wardrobe.
So while I did work on a new cardigan during the Holiday Break, you know I also cut out a pile of shirts. Since I use my TNT shirt patterns over and over again, the only thing that differentiates each shirt is the fabric used, buttons and any embellishments. The first shirt is made from an overprinted plaid fabric that I took the time to match the plaids while cutting it out. Though since the fabric is overprinted it really doesn't matter!
This shirt was made to go with the Simplicity Cardigan that I'm still trying to determine how to add closures to! Since there are two shirts in this blog post, I've broken it out by each shirt.
SHIRT ONE:
![]()
Materials ~
4 yds of 45" cotton & silk blend fabric purchased from Fabric Mart's brick & mortar store during March Sew Camp last year
Interfacing from Steinlauf & Stoeller
11 1/2" frosted floral buttons from the button stash
As I stated above there are no new construction techniques for this shirt. The difference is in the fabric and the way I cut it out.
Construction Info. ~
1. Front band was cut on the bias but when I added it to the shirt, I realized it didn't add anything to the shirt front. So I turned it to the back on the buttonhole side and outwards on the button side.
2. Back yoke piece was cut on the bias as was the collar, collar stand and cuffs.
![]()
3. I went with a white button to make the print pop on the shirt. Even though I did take the time to match the plaid.
4. I don't always burrito roll my shirt but for some reason I wanted to for this one. The burrito roll is still (years later) not intuitive to me. Thank goodness for this video from Sew Camp that I can refer to time and again. Also thanks to Kisha and Andrea for the help!
As an aside it's one of the things I love about Sew Camp - the sharing of techniques and learning from my fellow sewists.
A Few Pictures ~
![]()
![]()
![]()
![]()
SHIRT TWO:
![]()
Materials ~
4 yards of an embroidered cotton purchased from Marcy Tilton last year
Interfacing from Steinlauf & Stoeller
11 1/2" Mother of Pearl Buttons from the button collection
Construction ~
When I purchased this fabric I knew I wanted to cut the collar, collar stand, front button placket and cuffs from the unembroidered portion of the fabric. The pictures on Marcy's site were so good, I could see that part before I purchased the fabric.
Other than creative cutting there are no additional construction techniques for this shirt.
A Few Pictures ~
![]()
![]()
![]()
![]()
This was shirt two and three of the shirts I've recently completed. Both of these are made using the princess seam back version of my TNT shirt pattern. Both are like basics in my wardrobe even though they have a print on them. Both will go into the rotation right away especially since this seems like it will be a mild winter here in the tri-state area.
...as always more later!
So while I did work on a new cardigan during the Holiday Break, you know I also cut out a pile of shirts. Since I use my TNT shirt patterns over and over again, the only thing that differentiates each shirt is the fabric used, buttons and any embellishments. The first shirt is made from an overprinted plaid fabric that I took the time to match the plaids while cutting it out. Though since the fabric is overprinted it really doesn't matter!
This shirt was made to go with the Simplicity Cardigan that I'm still trying to determine how to add closures to! Since there are two shirts in this blog post, I've broken it out by each shirt.
SHIRT ONE:
Materials ~
4 yds of 45" cotton & silk blend fabric purchased from Fabric Mart's brick & mortar store during March Sew Camp last year
Interfacing from Steinlauf & Stoeller
11 1/2" frosted floral buttons from the button stash
As I stated above there are no new construction techniques for this shirt. The difference is in the fabric and the way I cut it out.
Construction Info. ~
1. Front band was cut on the bias but when I added it to the shirt, I realized it didn't add anything to the shirt front. So I turned it to the back on the buttonhole side and outwards on the button side.
2. Back yoke piece was cut on the bias as was the collar, collar stand and cuffs.
3. I went with a white button to make the print pop on the shirt. Even though I did take the time to match the plaid.
4. I don't always burrito roll my shirt but for some reason I wanted to for this one. The burrito roll is still (years later) not intuitive to me. Thank goodness for this video from Sew Camp that I can refer to time and again. Also thanks to Kisha and Andrea for the help!
As an aside it's one of the things I love about Sew Camp - the sharing of techniques and learning from my fellow sewists.
A Few Pictures ~
Worn with a RTW sweatshirt hoodie
SHIRT TWO:
Materials ~
4 yards of an embroidered cotton purchased from Marcy Tilton last year
Interfacing from Steinlauf & Stoeller
11 1/2" Mother of Pearl Buttons from the button collection
Construction ~
When I purchased this fabric I knew I wanted to cut the collar, collar stand, front button placket and cuffs from the unembroidered portion of the fabric. The pictures on Marcy's site were so good, I could see that part before I purchased the fabric.
Other than creative cutting there are no additional construction techniques for this shirt.
A Few Pictures ~
Worn with a RTW suede jacket that's been in my closet for ages...
This was shirt two and three of the shirts I've recently completed. Both of these are made using the princess seam back version of my TNT shirt pattern. Both are like basics in my wardrobe even though they have a print on them. Both will go into the rotation right away especially since this seems like it will be a mild winter here in the tri-state area.
...as always more later!